Common Floor Problems Explained...
Carpet | Hardwood | Laminate | Ceramic Tile | Vinyl Tile | Linoelum
Ceramic Tile...
Bond Failure
Tile not adhering to the substrate is considered bond failure. There are many issues that may cause this condition such as:
- Improper substrate
- Contaminated substrate
- Improper adhesive
- Allowing adhesive to set too long are all possible causes of bond failure.
Rollover Images for larger view:
Bond Failure
Bond Failure
Bond Failure
Lippage
Lippage is a condition where there is visible height difference where two ceramic tile meet. The possible causes of lippage are:
- The lack of floor preparation
- Issues with the thickness of the thin set adhesive causing height variation
- In both these cases the problem usually could have been corrected by the installer
Lippage
Lippage
Cracked tile
Cracked tile can be caused by:
- Installation errors
- Consumer abuse
- Improper substrate
- Manufacturing issues
A site inspection by a certified inspector is the most effective way to confirm the cause.
Rollover Images for larger view:
Cracked Ceramic
Cracked Ceramic
Gloss variation
Gloss variation is commonly a manufacturing issue. The gloss may vary with one tile or from tile to tile. It is possible to affect the finish (gloss level) with acids. Qualified installers should stop the installation at the first sign of noticeable gloss variation.
Color variation
Color variation, like gloss variation, is a manufacturing issue. Installers should stop installing the product as soon as noticeable color variation is noticed.